Boekel Scientific 270600 HC Thermal Mixer - Manual (Page 3)

N2400307, Rev. 1, 08/10 Page 3
1. Safety
The following symbols mean:-
Caution: Read these operating instructions fully before use and pay
particular attention to sections containing this symbol
Caution: Surfaces can become hot during use.
Always observe the following safety precautions
Use only as specified by the operating instructions, or the intrinsic protection may be impaired.
After transport or storage in humid conditions, dry out the unit before connecting it to the supply
voltage.
As the unit is producing shaking or rotational movement, be aware of the surface that the unit will be
placed upon.
Connect only to a power supply with a voltage corresponding to that on the serial number label.
Ensure that the main switch and isolating device (power supply connector) are easily accessible during
use.
Before moving, disconnect at the power supply socket.
If liquid is spilled inside the unit, disconnect it from the power supply and have it checked by a
competent person.
It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt
on or inside the equipment.
Before using any cleaning or decontamination method except those recommended by the
manufacturer, user should check with the manufacturer that the proposed method will not damage
the equipment.
Clean the unit only with a damp cloth; do not use chemical cleaning agents.
Place unit on a solid, level work surface or laboratory bench.