Boekel Scientific 201100 Mini Orbitron Variable Speed - Manual (Page 3)

N2400338 , 03/2012, Rev. 0 201100 Operating Instructions 3
1. Safety
The following symbols mean:-
Caution: Read these operating instructions fully before use and pay particular attention to
sections containing this symbol
Always observe the following safety precautions
Use only as specified by the operating instructions, or the intrinsic protection may be impaired.
After transport or storage in humid conditions, dry out the unit before connecting it to the supply voltage.
As the unit is producing shaking or rotational movement, be aware of the surface that the unit will be placed
upon. Always place unit on a solid, level work surface or laboratory bench.
Connect only to a power supply with a voltage corresponding to that on the external AC adapter label.
Ensure that the main switch and isolating device (power supply connector) are easily accessible during use.
Before moving, disconnect at the power supply socket.
If liquid is spilled inside the unit, disconnect it from the power supply and have it checked by a competent
person.
It is the user's responsibility to carry out appropriate decontamination if hazardous material is spilt on or
inside the equipment.
Before using any cleaning or decontamination method except those recommended by the manufacturer,
user should check with the manufacturer that the proposed method will not damage the equipment.
Clean the unit only with a damp cloth, do not use chemical cleaning agents.
Always ensure proper balancing of vessels on platform prior to operation.