Boekel Scientific 260014-2 TropiCooler - Manual (Page 4)

3
2. Product Information
The Boekel TropiCooler hot and cold incubator is a compact and efficient incubator for
samples stored in the temperature range of 39
°C below ambient to +69°C with a settable
temperature range of -19
°C to +69°C. Typical applications for the TropiCooler include
storing of frozen restriction enzymes, ligation experiments and hybridization testing.
The TropiCooler is supplied with two-machined aluminum blocks, each with a capacity for
14 x 1.5ml microcentrifuge tubes. Each block has a self-contained recessed handle for easy
transport.
Under typical lab ambient temperatures and low humidity, the TropiCooler has a well
operating temperature range of 39
°C below ambient to +69°C with a settable temperature
range of -19
°C to +69°C. As ambient temperature and/or humidity increases the
TropiCooler’s performance will diminish slightly in the cooling mode. The TropiCooler
should always be able to produce a well temperature of at least 39
°C below ambient under
typical laboratory conditions. The well temperature will typically fluctuate less than +/-
1.0
°C around the set point under normal operating conditions. When the TropiCooler is
operated in rooms with high ambient temperature (28
°C to 30°C) and/or high humidity
80%RH), the TropiCooler’s cooling mode performance can be diminished by up to 9
°C.
The rate of cool down will also be slower than normal under high ambient and high
humidity conditions. For optimum performance, the TropiCooler should be operated in a
cool, dry environment.
3. Assembly
3.1 Unpacking
Remove packing materials carefully, and retain for future shipment or storage of the unit.
Inspect for damage. Report all shipping damage to the carrier immediately. The carrier
covers shipping damage and repair/replacement for shipping damages must be
coordinated through the carrier. Complete and return the Warranty Registration Card.
Packs should contain:
• TropiCooler
• Operating Instructions
• Well Lid
• Power Cord
• Blocks
3.2 Installation
Place the TropiCooler on a flat and stable surface, preferably away from drafts. Plug
power cord into a power supply that matches the voltage listed on the serial number label
on the rear of the unit.