Citizen Systems Citizen CLP 6001 CLP-6001 - Manual (Page 52)

4-9
4.4 Ribbon Feed Troubleshooting
Problem Cause and remedy
Ribbon doesn't
wind.
•
Print mode is set to
direct-thermal printing.
•
Wrong ribbon path.
•
Ribbon wind direction is
reversed.
•
Ribbon wind tension is
not correct.
→
Change to the thermal-transfer
printing.
→
Use correct path.
→
Set it properly.
→
Set it properly.
Ribbon wrinkles.
•
Tension of ribbon holder
and ribbon winder is not
correct.
•
Print density (heating
factor) is not correct.
•
Angle of ribbon guide bar
is not correct.
→
Set it properly.
→
Correct the parameter of the Hnn
command with the printing
contents definition mode.
→
Contact our service personnel to
adjust the ribbon guide bar.
Note: If narrow paper is used, the ribbon may wrinkle. Decrease
the right head pressure by turning the offset adjustment screw to
prevent ribbon from wrinkling.