AOC L42H961 User Manual

Page 20

Text mode
Original mode

Connecting to a PC

1. Turn off the HDTV and PC.
2. Connect a 15-pin D-Sub RGB (VGA) cable

to the RGB output of your PC and the
other end to the VGA input at the rear of
the HDTV.

3. Connect the Audio Out on your computer

to the AUDIO input at the rear of the
HDTV.

4. Turn on the HDTV and PC.
5. Select VGA using the SOURCE button on

the remote, side of the HDTV or directly
by pressing the HDMI/PC button on the
Remote.

NOTE



For the best picture quality when

connecting a computer through VGA, set
your computer timing mode to native
resolution of panel. Please refer to the PC
or graphic card’s user guide for additional
information on how to set the timing
mode and the video output requirements
of the product.