AOC L26W898 - Manual (Page 27)

26
In AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2, VGA source:
Balance: To adjust left and right audio balance.
Bass: To adjust bass.
Treble: To adjust the treble.
Surround: To enjoy a concert hall effect, select “On” when stereo is playing.
Reverb: To enjoy the reverb sound effect of Concert, Living Room, Hall, Bathroom, Cave,
Arena, or Church.
Equalizer: To select equalizer modes from Rock, Pop, Live, Dance, Techno, Classic, Soft.
SPDIF Type: To select SPDIF Type from Dolby Digital, PCM, or Off.
Note:(a) Please select ”PCM” if input source is analog TV, AV, S-Video, or YPbPr.
(b) “Dolby Digital” will be better selection if input source is Digital TV or HDMI.
Auto Volume Control: To turn On or Off Auto Volume control. (This function is only effective in
TV source.)
Audio Only: To turn off the screen picture but keep the sound on.
TV Menu
—To set up for TV
It is only active in TV source.
Tuner Mode: To select Cable or Air as the TV source. Select “Cable” if you want to watch
Cable TV channels, and select Air to watch Air TV channels.
Auto Scan: To auto scan the TV and DTV channels. Press ENTER to start auto scanning Air
and Cable TV channels. Press MENU again at any time to interrupt scanning.