Antari B-200 - Manual (Page 10)

9
With optional BCT-1 timer remote control attached:
․ When the remote is connected, the B-200 can be controlled in two ways. The green
button on the remote is a manual override and the dial on the remote control sets the
timer function.
․ The B-200 will generate bubbles for as long as the green button is held down.
․ To enable the timer function, turn the dial clockwise. When the yellow light on the
remote turns on, the timer is on. The duration of bubbles is set at 10 seconds and is not
adjustable. The interval between bubble blasts is adjustable between 3 - 220 seconds.
To increase the interval, rotate the dial clockwise. To decrease the interval, rotate the
dial counter-clockwise.
With optional BCR-1 wireless remote control attached:
․ When the button on the wireless key chain transmitter is pressed, the B-200 bubble
machine will bubble continuously until the button is pressed again. The transmitter has
a range of up to 50 meters from the receiver.
Please save these instructions.