Antari SW-250 - Manual (Page 6)

6
Duration Set To set the duration time under timer mode by pressing Up/Timer and
Down/Volume buttons (10 to 200 seconds).
Timer Out To set the output volume under timer mode by pressing Up/Timer and
Down/Volume buttons (1 to 100 %).
Volume Out To set the output volume under continuous mode by pressing Up/Timer and
Down/Volume buttons (1 to 100 %).
DMX512 Add. To set the DMX channel under DMX control mode by pressing Up/Timer and
Down/Volume buttons (1 to 512 channels).
Wireless ON To activate/terminate the wireless control system by pressing Up/Timer and
Down/Volume buttons (ON/OFF). When wireless control system is activated, letter “W” will
be showed under main screen display “Ready To Snow”. Once the wireless control system is
terminated then the letter “W” will disappear accordingly.
Quick Start To activate / terminate quick start function by pressing Up/Timer and
Down/Volume buttons (ON/OFF). Once Quick Start function is on, the output job under timer
or continuous output (LCD/W-1/DMX) mode terminated by power off will be directly resumed
after power on again. When the unit is power off not under output mode then the LCD screen
will resume to “Ready To Snow” main screen display directly.
OUTPUT UNDER TIMER MODE
Press Up/Timer button to execute the interval/duration timing set and press Stop to stop.
OUTPUT UNDER CONTINUOUS OUTPUT MODE
Press Down/Volume button to output continuously until Stop button is pressed.
AIR VOLUME SETTING