Antari S-100X - Manual (Page 9)

9
Maintenance
1. Do not allow the snow liquid to become contaminated. Always replace the caps on the
liquid container and the snow machine liquid tank immediately after filling.
2. Before storing away after each operation, rinse the system with pure water and let it pump
for at least 1or 2 minutes. This step helps to ensure a longer life span of the motor and the
nozzle.
3. It is strongly recommended to regularly clean the dust/residue around the machines' vent
holes (on both sides of the machine). Simply use a small brush, a toothbrush for example,
and gently brush in the direction from top to bottom. This step helps to ensure that minimal
debris will get into the machine or causes clogging.
Snow Liquid
Depending on the desired effect, use either ANTARI SL-5 Snow/Foam Liquid for normal snow
or ANTARI SL-5A Snow Liquid for fast-dissipating snow.
Technical Specifications
MODEL S-100X & S-200X
Power Supply 100/120V AC, 230/240V AC, 50/60Hz
Motor 770W (min. output ), 1000W (max. output)
Output Volume 180ml/min
Tank Capacity 5 liters
Fluid Consumption Rate 5.5 min /liter (100 % output)
Weight 11 kg
Dimensions (LxWxH) L505 W276 H280 mm
Remote Included SC-2
10 Meter Remote Extension EXT-6
DMX On-board
Warm-up Time N/A
Save these instructions.