Antari M-4 - Manual (Page 5)

5
Setting Up
Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm
open space at each side of the machine and 5 meters for the output direction of the
machine.
Step 2: Fill the fluid tank with Antari fog fluid.
Step 3: Connect the machine to suitable rated power supply. To determine the power
requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly
grounded to avoid risk of electrocution.
Step 4: Turn on the machine by connecting the power cord and turning the Neutrik
Powercon. Heat-up takes approximatly 5 minutes. Once the machine has reached operating
temperature, the LCD screen will display “Ready To Fog”. Now the machine is ready for
operation.
Control Panel Operation
The machine can be operated with the on-board LCD control panel.
Button Function
[Menu] Select from functions
[ ▲ / Timer]
To increase value or choose from options
To activate Timer Mode
[ ▼ / Volume]
To decrease value or choose from options
To active Volume Mode
[Stop]
To deactivate Timer/Volume function
Or to select and memorize the setting
ANTARI M-4
Ready to Fog