Antari F-1 - Manual (Page 11)

11
3. One machine can be controlled by up to 5 transmitters while one transmiter can be
registered to unlimited number of machines.
Service and Maintenance
․ Do not allow the machine and fluid to become contaminated.
․ Regularly fill distilled water to fluid tank and run the machine to clean the system.
After cleaning, refill Antari fog fluids into fluid tank and make sure machine can
produce fog properly.
․ It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
․ Excessive dust, liquid and dirt built up will degrade performance and cause
overheating.
Technical Specifications
Input voltage 110-120V 60Hz or 220-240V 50Hz
Fuse/Breaker 110
– 120V = 10A 250V
220
– 240V = 5A 250V
Power Consumption AC 120V 790W
AC 230V 700W
Warm-up time 4 minutes (approx.)
Fluid tank capacity 2.4 Liter
Maximum Fluid consumption 8.5 ml / per minute
Recommended Fluid Antari FLG water-based fog fluid for the best effect
Control options LCD Menu, DMX 512, Wireless DMX, Wireless Remote
Adjustable haze volume and fan speed
DMX channels 2 channels, haze output volume and fan speed
Power connection Neutrik PowerCon
DMX data connection 3-pin and 5-pin XLR
Dimension L 608 x W 275 x H 286 mm
Dry weight 14.1 kg