Performance data sheet – Culligan Silver SeriesTM User Manual

Page 18

Culligan knows the more informed you are about your water treatment systems, the more confident you will be
about its performance. It’s because of this and more than sixty years of commitment to customer satisfaction that
Culligan is providing this Performance Data Sheet to its customers.

IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your
actual water treatment needs. It is recommended that before purchasing a water treatment unit, you have your water
supply tested to determine your actual water treatment needs.

MANUFACTURER:

Culligan International Company,
One Culligan Parkway, Northbrook, IL 60062-6209 USA
(847) 205-6000

PRODUCT: Culligan Silver Series

™

9” Water Softener

TESTING CONDITIONS & RESULTS:
Flow Rate: 7.5 gpm

Capacity: 17,500 grains @ 4.0 lb. salt

Pressure::::: 30 - 40 psi

23,900 grains @ 8.0 lb. salt

Acidity: Non-Corrosive

26,600 grains @ 12.0 lb. salt

Temperature::::: 68° (20°C)
pH: 7.6

SOFTENER SPECIFICATIONS:
Maximum Flow Rate: 7.5 gpm (30 Lpm)
Pressure Drop at Maximum Flow Rate: 15 psi (102 kPa)
Operating Temperature Range: 33 - 120°F (1 - 50°C)
Maximum Drain Flow Rate: 2.3 gpm (9 Lpm)
Working Pressure Range: 20 - 120 psi (140 - 860 kPa)
Operat

Operat

Operating Pressure Range (Canada):

ing Pressure Range (Canada):

ing Pressure Range (Canada): 20 - 90 psi (140 - 620 kPa)

The Culligan Silver Series Water Softeners are tested and validated by WQA and certified by UL against
ANSI/NSF Standard 44 for the effective reduction of calcium and magnesium (hardness) as well as
Barium and Radium 226/228*.

Refer to the Specifications, Familiarization and Warranty section of this Owner’s Guide for more specific
product information. To avoid contamination from improper handling and installation, your system
should only be installed and serviced by your Culligan Man. Performance will vary based on local water
conditions. The substances reduced by this system are not necessarily in your water.

Culligan water softeners are designed to work with any salt of good quality, although it is recommended
that you ask your local Culligan Man for his suggestion on the best type and grade of salt to use in this
softener.

NOTICE: This softener is not intended to be used for treating water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the system.

*Verified utilizing hardness surrogate per ANSI/NSF Standard 44.

Performance Data Sheet

SUBST

SUBSTANCE REDUCTION

ANCE REDUCTION

USEPA SDWA

Test Influent

Test Effluent

Substance

MCL

Reduction

Concentration

Level

Barium

2 mg/L

80%

10 mg/L

2.0 mg/L

Radium 226/228

5 pCi/L

80%

25 pCi/L

5 pCI/L

Buyer Signature _____________________________________________

Date __________

Seller Signature _____________________________________________

Date __________

ANSI/NSF 44

Water Softener

81WN