AltiGen MAXCS 7.0 Update 1 MaxMobile User Guide for iPhone - Manual (Page 6)

2 MaxMobile Communicator iPhone Edition
Like a remote extension, the iPhone running MaxMobile serves as an office
extension, making and receiving calls through the PSTN (public switched
telephone network) to and from your company’s MAXCS system. You can
call company extensions (both inside and remote extensions) just by dialing
the extension number. Your calls to destinations outside the company can
go through the MAXCS system, as illustrated in Figure 1, if you so choose.
Requirements
• Apple iPhone version 4.0 or later, running iOS version 6.0 or later.
You should be familiar with the buttons on the phone and general
phone navigation. You can find the iPhone user guide at http://
support.apple.com/manuals/#iphone.
• MAX Communication Server (MAXCS) 7.0 ACC or ACM.
• MAXCS must be configured by your system administrator to enable
mobile extension features.
• Your system administrator must have assigned a MaxMobile license to
your extension.
• Your system administrator must enable the Early Media option for the
SIP trunk that is being used as the MaxMobile trunk, if your iPhone is
running iOS 7.
Installing MaxMobile
Wi-Fi (if available) is recommended when you work in your office. The
following steps are used to set up the iPhone.
Enable Wi-Fi setting on the iPhone
1. Press the Home key, and tap the Settings button .
2. Tap Wi-Fi.
3. Set Wi-Fi to ON and choose a network.
Note: MaxMobile Communicator supports 3G and 2G networks and Wi-
Fi. 3G or Wi-Fi is required for access to the MaxMobile call
control buttons.