Crimestopper Security Products CS-2013FM - Manual (Page 18)

ADDITIONAL TRANSCEIVER PROGRAMMING: 2-WAY FM REMOTE
1. Turn the ignition on, within 10 seconds press the override/program button 5 times. Siren will chirp 3 times
indicating you are in feature programming mode.
2. Within the next 5 seconds, carefully press the override/program button 22 times. The siren will chirp once for
each button press. Press Carefully and DO NOT LOSE COUNT.
3. Press Button #2 on the 1-Way remote.
4. Press Button #1 on the new 2-way FM remote, wait a second then press button 1 again. System should chirp
2x’s.
5. Turn OFF Ignition.
OPERATION: (2-WAY FM REMOTE TRANSCEIVER)
2-WAY FM REMOTE OPERATION:
ARM/DISARM
(LOCK/UNLOCK)
LCD SCREEN
BATTERY LIFE
TIME OF DAY
TRUNK POP
AUX #2 STATUS
SIDE VIEW
FRONT
5-BUTTON LCD PAGER/REMOTE TRANSCEIVER
REMOTE
CONFIRM
BUTTON #1
BUTTON #2
FIXED ANTENNA
BUTTON #3
BUTTON #4
BUTTON #5
REMOTE
START
BUTTON #1 (Lock Symbol):
Press and release to Arm/Disarm, Lock/Unlock system.
Press and Hold for PANIC feature.
BUTTON #2 (Key Symbol):
Press and Hold for 2 seconds Start or Stop Engine
BUTTON #3 (Trunk Symbol):
Press and Hold for trunk pop or (Auxiliary #1 output.)
BUTTON #4 (*):
Press and Hold Button #4 for 2 seconds to activate
Auxiliary Channel #2 output.
BUTTON #5 (C):
Confirmation: Press and hold Button #5 for 3 seconds
until “CON” is displayed on the LCD screen. Release
button immediately. The remote control will query the
unit in the vehicle and display the current status of arm,
disarm, or engine run. Press Button #5 for 2 seconds
to activate the EL Blue LCD backlighting. Press and
release Button #5 to cancel incoming
page/confirmation tones.