beautypg.com

Lights – Acura 2001 NSX - Owner's Manual User Manual

Page 222

background image

Lights

3. Remove the cover from the back

of the burned-out bulb by turning
it counterclockwise.

4. Remove the electrical connector

from the bulb by grasping it
between your thumb and fingers
and pushing downward while you
wiggle it slightly. Make sure you
pull on the connector, not the
wires.

5. Push the edge of the hold-down

spring and turn counterclockwise.

6. Insert the new bulb into the socket,

making sure all the tabs are in
place.

7. Reinstall the hold-clown spring.

8. Push the electrical connector back

onto the bulb. Make sure it is on
all the way.

9. Replace the bulb cover. Line up

the three tabs, push the cover in,
and turn it clockwise until it locks.

10.Reinstall the headlight motor fuse.

11.Turn on the headlights to test the

new bulb.

Maintenance

HOLD-DOWN SPRING

BULB

CONNECTOR

COVER

Main Menu

Table of Contents