beautypg.com

Wiper blades – Acura 2001 NSX - Owner's Manual User Manual

Page 208

background image

Wiper Blades

Check the condition of the wiper

blades at least every six months.

Look for signs of cracking in the
rubber, or areas that are getting
hard. Replace the blades if you find
these signs, or they leave streaks
and unwiped areas when used.

To replace the blade:

1. Turn the ignition ON (II), switch

the wipers to INT or — (low
position), then turn the ignition

OFF when the wiper arm is
approximately midway in its travel.

2. Disconnect the blade assembly

from the wiper arm by pushing in
the lock tab. Hold it in while you
push the blade assembly toward
the base of the arm.

CONTINUED

Maintenance

LOCK TAB

Main Menu

Table of Contents