beautypg.com

Spark plugs – Acura 2001 NSX - Owner's Manual User Manual

Page 203

background image

Spark Plugs

2. Disconnect the three ignition coils

from the wire harness by squeez-
ing the harness end of each con-
nector and pulling.

3. Remove the two 10 mm bolts

holding the ignition coil. Remove
the ignition coil by pulling it

straight out as you twist it slightly.

4. Remove the spark plug with

a five-eighths inch (16 mm) spark
plug socket.

5. Put the new spark plug into the

socket; then screw it into the hole.
Screw it in by hand so you do not
crossthread it.

Maintenance

IGNITION COIL

10 mm

BOLT

SPARK PLUG SOCKET

Main Menu

Table of Contents