Acura 2002 MDX - Owner's Manual - Manual (Page 35)

The following pages provide
instructions on how to secure a rear-
facing child seat with this type of
seat belt.
To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt feed back into the
retractor (you might hear a
clicking noise as the belt retracts). With the child seat in the desired
back seating position, route the
belt through the child seat
according to the seat maker’s
instructions, then insert the latch
plate into the buckle.
The lap/shoulder belts in the back
seats have a locking mechanism that
must be activated to secure a child
seat.
If you have a child seat designed
to attach to the vehicle’s LATCH
anchorage system, follow the
instructions on page
.
Before installing a child seat in the
center seat of the second row or
either of the third row seats, make
sure the seat belt detachable
anchor is latched (see page
).
1.
2. 3.
98
44
CONTINUED
Installing a Rear-Facing Child Seat
with a Lap/Shoulder Belt
Protecting Children
Driver and Passenger Saf ety 31
01/09/07 12:00:48 31S3V610_036
Main Menu Table of Contents