beautypg.com

Lights – Acura 2002 MDX - Owner's Manual User Manual

Page 302

background image

Turn on the headlights to test the
new bulb.

Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.

Put the light assembly into the
bumper. Tighten the mounting
bolt.

Remove the socket by turning it
one-quarter turn counterclockwise.

Open the tailgate. Use a
screwdriver protected with a cloth
to pry open the two covers.

Determine which of the four bulbs
is burned out: stop/taillight, turn
signal/hazard lights, side marker
light, or back-up light.

Remove the two screws and
remove the rear light assembly
from the rear pillar.

Remove the burned out bulb. To
remove the stop/taillight, back-up
or side marker light bulb, pull the
bulb straight out of its socket. To
remove the turn signal/hazard
light bulb, push it in and turn it
counterclockwise until it unlocks.

1.

2.

3.

4.

8.

6.

7.

5.

Replacing Rear Bulbs

Lights

Maintenance

298

01/09/07 12:42:57 31S3V610_303

Main Menu

Table of Contents