beautypg.com

Lights – Acura 2005 TSX - Owner's Manual User Manual

Page 217

background image

Open the hood. To change a bulb
on the driver’s side, undo the
three fasteners and remove the air
intake cover.

Remove the electrical connector
from the bulb by pulling the
connector straight back.

Remove the rubber weather seal
by pulling on the tab.

Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way and remove the bulb.

Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.

Install the rubber weather seal
over the back of the headlight
assembly. Make sure it is right
side up; it is marked with an arrow.

1.

2.

3.

6.

4.

5.

Lights

216

FASTENER

AIR INTAKE COVER

HOLD-DOWN WIRE

BULB

CONNECTOR

RUBBER WEATHER SEAL

Main Menu

Table of Contents