Vehicle stability assist (vsa) system – Acura 2005 TSX - Owner's Manual User Manual
Page 182
If the VSA system indicator comes
on while driving, pull to the side of
the road when it is safe, and turn off
the engine. Reset the system by
restarting the engine. If the VSA
system indicator stays on, or comes
back on while driving, have the VSA
system inspected by your dealer.
The vehicle stability assist (VSA)
system helps to stabilize the vehicle
during cornering if the vehicle turns
more or less than desired. It also
assists you in maintaining traction
while accelerating on loose or
slippery road surfaces. It does this
by regulating the engine’s output,
and by selectively applying the
brakes.
When VSA activates, you will see the
VSA activation indicator blink.
The VSA system cannot enhance the
vehicle’s driving stability in all
situations and does not control your
vehicle’s entire braking system. It is
still your responsibility to drive and
corner at reasonable speeds and to
leave a sufficient margin of safety.
When VSA activates, you may notice
that the engine does not respond to
the accelerator in the same way it
does at other times.
CONTINUED
Vehicle Stability Assist (VSA) System
VSA Activation Indicator
VSA System Indicator
D
riv
ing
181
VSA ACTIVATION INDICATOR
VSA SYSTEM INDICATOR
Main Menu
Table of Contents