Acura 2005 MDX - Owner's Manual - Manual (Page 23)

Your seat belt system includes lap/
shoulder belts in all seven seating
positions. The front seat belts are
also equipped with automatic seat
belt tensioners.
The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you and your passengers to
fasten your belts.
The lap/shoulder belts in the center
seat of the second row and both of
the third row seats are equipped with
a detachable anchor that has two
parts: a small latch plate and a
buckle.
The detachable anchor should
normally be latched whenever the
seats-backs are in an upright position.
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched (see page
for how to
properly position the belt).
To unlock the belt, push the red
PRESS button on the buckle. Guide
the belt across your body so that it
retracts completely. After exiting the
vehicle, be sure the belt is out of the
way and will not get closed in the
door.
All seat belts have an emergency
locking retractor. In normal driving,
the retractor lets you move freely in
your seat while it keeps some
tension on the belt. During a collision
or sudden stop, the retractor
automatically locks the belt to help
restrain your body.
If you turn the ignition to ON (II)
before fastening your seat belt, the
beeper will sound and the indicator
will flash. If you do not fasten your
seat belt before the beeper stops, the
indicator will stop flashing but
remain on.
The lap and shoulder belt goes over
your shoulder, across your chest,
and across your hips.
If you continue driving without
fastening your seat belt, the beeper
sounds and the indicator will flash
again at regular intervals.
16
CONTINUED
Additional Information About Your Seat Belts
Seat Belt System Components Lap/Shoulder Belt
Dr
iv
er
and
P
asseng
er
Saf
e
ty
21
Main Menu Table of Contents