Acura 2006 TL - Owner's Manual - Manual (Page 61)

The instrument panel has many
indicators to give you important
information about your vehicle.
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
.
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page
.
See page .
This indicator has two functions:
If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem in the brake
system. For more information, see
page
.
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passengers to fasten your seat belts.
A beeper also sounds if you have not
fastened your seat belt.
If you continue driving without
fastening your seat belt, the beeper
sounds and the indicator flashes
again at regular intervals, and you
will also see a ‘‘FASTEN SEAT
BELT’’ message on the multi-
information display (see page
).
If you drive without releasing the
parking brake, a chime will sound,
and you will also see a ‘‘RELEASE
PARKING BRAKE’’ message on the
multi-information display (see page
).
If you turn the ignition switch to the
ON (II) position before fastening
your seat belt, the beeper sounds,
and the indicator flashes. If you do
not fasten your seat belt before the
beeper stops, the indicator stops
flashing but remains on.
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires. 1.
2.
69
256
256
257
258
70
Instrument Panel Indicators
Seat Belt Reminder
Indicator
Low Oil Pressure
Indicator
Charging System
Indicator
Malf unction Indicator
Lamp
Parking Brake and
Brake System
Indicator
60
Canada U.S.
Main Menu Table of Contents