beautypg.com

Clock, parking brake – Acura 2006 TL - Owner's Manual User Manual

Page 113

background image

To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake
indicator on the instrument panel
should go out when the parking
brake is fully released (see page

).

The clock displays the time with the
ignition switch in the ON (II)
position. If your vehicle’s battery is
disconnected or goes dead, you will
need to reset the clock.

For example: 1:06 will reset to 1:00

1:52 will reset to 2:00

The clock is set automatically.

Change the hour by pressing and
holding the H button until the
numbers advance to the desired time.
Change the minutes by pressing and
holding the M button until the
numbers advance to the desired time.

You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, press the R
button to set the clock back to the
previous hour. If the displayed time
is after the half hour, the clock sets
forward to the beginning of the next
hour.

60

On models without Navigation System

On models with Navigation System

Clock

Parking Brake

Clock, Parking Brake

112

Driving the vehicle with the parking
brake applied can damage the rear
brakes and axles.

Main Menu

Table of Contents