Acura 2012 RL - Advanced Technology Guide - Manual (Page 7)

9
10 11
C u s t o m i z i n g S e t t i n g s
Some examples on how to program vehicle settings.
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
1. Turn the ignition switch to
ON (II). Shift into Park (P).
3. Press MEMO. You will hear a
beep.
2. Adjust your steering wheel, seat
and outside mirror settings.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
Note: A stored memory position is linked to the corresponding keyless remote
(1 or 2). Each item begins to adjust when you unlock the driver’s door with
the remote and enter the vehicle.
R E V E R S E T I L T D O O R M I R R O R S
H o w I t W o r k s
When you shift into Reverse, you can tilt either outside door mirror down slightly to
improve your view as you parallel park. Shifting out of Reverse returns the tilted mirror
to its original position.
• To tilt the driver’s
door mirror, move the
mirror selector switch
to the left (L) position.
• To tilt the passenger’s
side door mirror,
move the mirror
selector switch to the
right (R) position.
• To turn the feature
off, move the switch
to the middle
position.
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
1. Turn the ignition switch to
ON(II).
2. Store your desired stations on
the preset buttons and adjust
your preferred audio sound
levels (BASS, TREBLE, etc.).
3. Set your preferred climate
control settings (fan speed,
temperature, etc.).
4. Once you turn the car off,
your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
P O W E R F O L D I N G M I R R O R S
( A d v a n c e )
Fold both outside door mirrors up when parking in tight spaces.
H o w I t W o r k s
1. Turn the ignition switch to ON (II).
2. Press the folding button to fold the mirrors up.
3. Press the button again to restore the mirrors to their original positions
before driving.
12 RL ATG:ATG_NEW STYLE 8/30/2011 3:33 PM Page 7