Acura 2013 TSX - Advanced Technology Guide - Manual (Page 6)

DRIVING POSITION MEMORY SYSTEM (DPMS)
Store driver’s seat positions into memory for each corresponding keyless remote (1 or 2),
which are recalled when you unlock the driver’s door with the remote and enter the
vehicle.
P r o g r a m m i n g D P M S
1. Turn the ignition switch to
ON (II). Shift into Park (P).
3. Press the SET button. You will
hear a beep.
2. Adjust your preferred seat
settings.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
Note: Stored positions can also be recalled by pressing memory buttons (1 or
2) on the door.
9 8
R E V E R S E T I L T D O O R M I R R O R
H o w I t W o r k s
When you shift into Reverse (R), the passenger’s outside door mirror tilts down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
• To tilt the passenger’s
door mirror, move the
mirror selector switch
to the right (R)
position when in
Reverse.
• To turn the feature
off, move the switch
to the middle or left
(L) position.
R E A R V I E W C A M E R A
( T e c h n o l o g y P a c k a g e )
For added convenience, the area behind your vehicle is displayed to help you
navigate while backing up.
• When you shift into Reverse, a real-time image of
the area behind your vehicle is shown in the
navigation display.
• Yellow parking guidelines also appear to help you
judge distance.
• Adjust the screen brightness by turning the
Interface Dial.
• The display turns off when you shift out of Reverse.
H o w I t W o r k s
13 TSX 4D ATG_ATG_NEW STYLE 7/31/2012 4:24 PM Page 6