Inspecting and changing fuses – Acura 2014 TSX Sport Wagon - Owner's Manual User Manual
Page 308
![background image](/manuals/659171/308/background.png)
307
uu
Fuses
u
Inspecting and Changing Fuses
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK
(
0 . Turn
headlights and all accessories off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine
compartment.
u
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4. Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
1
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system. If you do not have a replacement
fuse with the proper rating for the circuit, install one
with a lower rating.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
P. 305
and
P. 306
.
There is a fuse puller on the back of the engine
compartment fuse box.
Fuse
Blown Fuse
Combined Fuse
Blown Fuse
Fuse Puller
14 ACURA TSX 5D-31TL76300.book 307 ページ 2013年6月17日 月曜日 午後3時21分
QRG
Index
H
a
n
d
li
ng
th
e Un
ex
pe
ct
e
d
TOC
2014 TSX Sport Wagon