Acura 2014 TSX Sport Wagon - Owner's Manual - Manual (Page 116)

115
uu Operating the Switches Around the Steering Wheel u Driving Position Memory System
1. Adjust the driver’s seat to the
desired position, and turn the ignition
switch to ON
( w .
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press memory button ( 1 or ( 2 within five
seconds of pressing the SET button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
1. Move the shift lever to ( P .
2. Apply the parking brake.
3. Press a memory button ( ( 1 or ( 2 ).
u You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
■ Storing a Position in Memory 1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You turn the ignition switch to any position except
ON
( w .
Memory Button 1
Memory Button 2
Set Button
■ Recalling the Stored Position 1 Recalling the Stored Position
The seat will stop moving if you:
• Press the SET button, or a memory button (
( 1 or
( 2 ).
• Adjust the seat position.
• Shift into any position except ( P .
Memory Buttons
14 ACURA TSX 5D-31TL76300.book 115 ページ ２０１３年６月１７日 月曜日 午後３時２１分
QRG
Index
C
ont
rol
s
TOC
2014 TSX Sport Wagon