Instrument panel indicators – Acura 2014 TL - Owner's Manual User Manual
Page 75

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
and
.
This indicator has two functions:
If it comes on while driving, it
indicates that one or more of your
vehicle’s tires are significantly low
on pressure.
You will also see a ‘‘CHECK TIRE
PRESSURE’’ message on the multi-
information display (see page
).
Check the tire pressure monitor on
the multi-information display and
determine the cause (see page
).
If this indicator begins to flash,
there is a problem with the tire
pressure monitoring system
(TPMS). You will also see a
‘‘CHECK TPMS SYSTEM’’
message on the multi-information
display. The indicator continues to
flash for a while (approximately 1
minute), then stays on. If this
happens, have your dealer check
the system as soon as possible.
For more information, see page
.
If this happens, pull to the side of the
road when it is safe, check which tire
has lost pressure on the multi-
information display, and determine
the cause. If it is because of a flat tire,
replace the flat tire with the compact
spare (see page
), and have the
flat tire repaired as soon as possible.
If two or more tires are underinflated,
call a professional towing service.
For more information, see page
.
1.
:
2.
187
516
515
514
184
583
607
Instrument Panel Indicators
Low Tire Pressure/
TPMS Indicator
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
69
12/07/20 10:38:38 31TK4640_074