Acura 2014 TL - Owner's Manual - Manual (Page 166)

When you unlock the driver’s door
with your remote transmitter, each
remote transmitter activates the
customized settings related to that
remote.
When you unlock and open the
driver’s door with the remote, the
driver’s seat (except power lumbar)
and outside mirrors move to the
positions stored in memory. An
indicator on one of the driving
position memory buttons on the
driver’s door also comes on.
You will also see the ‘‘DRIVER 1’’ or
‘‘DRIVER 2’’ message on the multi-
information display, depending on
which linked remote transmitter is
used.
Driving position memory
(see page
).
Customized settings
(see page
).
Here are the settings activated with
the remote:
The driving position memory
activated (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
Audio system settings
(see page
).
Climate control settings
(see page
).
170
236
94
228
Remote Transmitter
Recalling a Memorized Driving
Position
160
Driver 1 Driver 2
12/08/03 20:56:10 31TK4640_165