Acura 2014 TL - Owner's Manual - Manual (Page 543)

Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the display the
next time you turn the ignition
switch to the ON (II) position.
Turn the ignition switch to the
ON (II) position.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
and .
If maintenance service is done by
someone other than your dealer,
reset the Maintenance Minder as
follows:
If the engine oil life is not
displayed, press the SEL/RESET
button on the steering wheel
repeatedly.
Press and hold the SEL/RESET
button on the steering wheel for
more than 10 seconds. The
remaining engine oil life reset
mode will be shown on the multi-
information display.
Select ‘‘RESET’’ by pressing the
INFO (
) button, then press the
SEL/RESET button to reset the
engine oil life display. The
maintenance item code(s) will
disappear, and the engine oil life
will reset to ‘‘100.’’ If you want to
cancel the oil life reset mode,
select ‘‘CANCEL.’’
3.
1.
2.
4.
:
184 187
Maintenance Minder
Resetting the Engine Oil Lif e
Display
Ma
int
e
na
nce
537
TM
12/07/20 11:39:21 31TK4640_542