Program your vehicle to operate up to three remote-controlled devices around your
home—such as garage doors, lighting, or home security systems—using the buttons
on the ceiling.

Training a Button

Park near the system you want to program, and follow the instructions in the
flowchart below.

To retrain a button or erase codes, see the Owner’s Manual on the Owner
Information CD or visit owners.acura.com (U.S.) or www.myacura.ca (Canada).
If you need help, visit www.homelink.com.

Press and hold the button on the remote

and the HomeLink button at the same

time. Then, while continuing to hold the

HomeLink button, press and release the

button on the remote every 2 seconds.

Does the LED blink at a faster rate within 20 seconds?

Press and hold the

HomeLink button

again.

Training

complete

YES

HomeLink indicator

flashes for 2 seconds,

then remains on.

HomeLink LED

remains on.

YES

Position the remote transmitter

1–3 inches (3–8 cm) from the

HomeLink button you want to program.

Press and hold the desired HomeLink

button and the button on the remote

transmitter.

Does the HomeLink indicator (LED) blink at a faster

rate after about 10 seconds?

The remote has a rolling code. Press

the “learn” button on the

remote-controlled device (e.g., garage

door opener).

Press the programmed HomeLink

button again; the remote-controlled

device should operate.

Within 30 seconds, press and hold the

programmed HomeLink button for 2

seconds.

Press and hold the programmed

HomeLink button for about a second.

Does the device (garage door opener) work?

HomeLink

indicator

HomeLink

buttons

Climate Control System

The automatic climate control system can maintain your preferred interior
temperature by selecting the proper mix of heated or cooled air and fan speed.

Seat Heaters

Quickly warm the front seats when the vehicle is on. An indicator in the selected
switch appears when the seat heaters are on.

LO button: Press to slowly warm the seat, or to
maintain continuous heating.
HI button: Press to quickly warm the seat. If left in
HI, the heater cycles on and off.
Return the switch to the center to turn the seat
heaters off.

Heat-induced burns are possible when using seat heaters.
Persons with a diminished ability to sense temperature (e.g., persons with diabetes,

lower-limb nerve damage, or paralysis) or with sensitive skin should not use the

seat heaters.

WARNING

AUTO button:

Press, then use the

temperature control dial

to set your preferred

temperature.

ON/OFF

button

Fan speed

buttons

Windshield

defroster

button

Passenger’s side

temperature

control dial

SYNC button:

Set the

passenger’s side

temperature to

the same as the

driver’s side.

Rear window

defogger

button

Recirculation

button:

Choose

recirculation or

fresh air.

A/C

button

Vent mode

button: Change

the vent source.

Driver’s side

temperature

control dial