Panasonic NE-1054F - Manual (Page 17)

How to Opsrate
D. To Select Beep Tone Options;
The Beep Tone can be set, ON or OFF.
1. Open the door.
Display Window
0
2
,
3.
4.
PROG.
3:30
PROG.
•Press the PROG. Pad.
The display will not change.
•Press the Memory Pad 0.
•Repeat pressing of 0 Pad. Select “OFF”
of Beep Tone.
Stage Indicator 1 = ON
Stage Indicator 2 = OFF
•Press the PROG. Pad again.
You have completed programming
the beep tone,
•2 seconds later, the Display Window wl/l
go blank.
E. To Read the Cycle Counter:
Tne oven can display the total number of times the oven has been operated cumulatively.
Great for analyzing usage of the oven and traffic flow at the location.
1, Open the door.
0
bE EP
PROG 2
L
bE EP
PROG_?
b E E P
Display Window
0
m
o
tn
2 .
STOP/RESET
IMlii
F*OWER
•While pressing STOP/RESET Pad,
press POWER Level Selector Pad. The
display shows the total cumulative number of
times the oven has been used.
Example:
• 9999 means, the oven has been
used 999900 times.
• 0020 means the oven has been
used 2000 times.
• If the total cumulative number
of times less than 100 times, the
display will not be changed.
•2 seconds later, "0" will reappear in the
Display Window,
3 3 3 3
0
-
1 7