Panasonic NE-1054F - Manual (Page 12)

How to Operate
Programming------------ ----------------------------------------------------------------------------
— DO NOT OPEN THE DOOR —
The Display Window MUST be blank before programming can begin. If any Indicator light is
illuminated in the digital Display Window: Close the door, press STOP/RESET Pad and wait 1
minute until the Display Window goes blank.
A. Programming Memory Pads for Single Stage Heating:
Example: To program 30 seconds at Medium Power for Memory Pad Number 5
Display Window
'd-
lO
o
I
LU
1 .
PROG.
2,
■60
3.
Mllh
POWER
•Press the PROG. Pad.
NOTE:
•If no PROG Indicator appeared in the
Display Window, “Program Lock” should
be cancelled. (See page 15.)
•Do not keep pressing PROG. Pad for more
than 30 seconds, or a false failure code
may result,
•Press Memory Pad 5.
The pad number and the previously
selected time and power level will
appear in the Display Window,
•The pad number and Stage
Heating Indicator will appear
in the Display Window again.
•Press the Power Level Selector
Pad 3 times. The Memory Pad
display will go out.
Display Window
PROG 1
1 D O
PROG 1
4.
:30
w
1
3:30
I
•Press Memory Pads 3 and 0.
3 0
5.
PROG.
•Press the PROG. Pad again.
You have completed programming
the selected Memory Pad for
single stage heating and double
heating time for multiple portion
heating automatically.
•2 seconds later, the time and
power level setting for single
stage will appear in the Display Window.
•2 seconds later, Double Quantity
Heating Indicator and then the
double heating time will appear
in the Display Window.
:x2)
3 0
UEO
X2 PROG 1
X2 PROG 1
/ D O
•2 seconds later, the Display Window
will go blank.
- 1 2 -