Heating, A. manual single stage heating, Г do – Panasonic NE-1054F User Manual
Page 10: L 59, B. manual 2 or 3 stage heating, How to operate, Г d o, D d d
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Operate
HEATING ------------------------------------------------------------------------------------------------------------------------------------
Open the door and place food in the oven cavity. Close the door.
“0” must be showing in the Display Window.
A. Manual Single Stage Heating:
This feature gives the user maximum flexibility to set the oven to desired heating time and power level. Ideal for menus that
require various heating requirements.
h-
Lf)
O
UJ
Example: To heat for 2 minutes at High Power
1
.
2
.
3.
mill
POWER
■20
Q
3:30
I
START
3:30
•Press the
POWER
Level Selector
Pad one time.
•Press the Memory Pads 2, 0 and 0.
•Press the
START
Pad.
Heating will start.
The time in the Display Window will
count down.
Display Window
г D O
l
59
4.
Beep tone will sound.
D -
•All heating will stop.
When opening the door, the
display will stop blinking.
B. Manual 2 or 3 Stage Heating:
This feature allows you to set to begin heating at one power level then shift automatically to a different power level after the
designated amount of heating time.
Example: To heat for 2 minutes at Defrost power for 2 stage heating
1. Follow steps 1 and 2 above.
Display Window
2
.
Illhi
ROWER
•Press the
POWER
Level Selector
Pad 5 times. Indicator will change
each time the pad is pressed.
3.
0
3:30
j
3:30
•Press the Memory Pads 2, 0 and 0.
D D D
4.
START
5. Beep tone will sound.
•Press the
START
Pad.
The total time for both stages will be
displayed. The oven lamp will be
turned on. Heating will start.
•The time in the Display Window will
count down.
•When oven shifts to the next stage, a
single beep tone will sound.
•All heating will stop.
When opening the door, the display
will stop blinking.
9 0 0
7 59
0
NOTE:
For a 3 stage heating cycle, select a power level again and set the cooking time, between steps 3 and 4 above.
SPECIAL NOTE: For both single and 2 or 3 stage heating.
1. While heating, one touch on the
STOP/RESET
Pad stops the oven. You can restart by pressing the
START
Pad or a second
touch on the
STOP/RESET
Pad will cancel the selected program.
2. One touch on the
STOP/RESET
Pad, before the heating cycle is started, will cancel the selected program.
- 1 0