Clarion VS738 - Manual (Page 15)

14
Basic Operation
- Use the 0-9 keys to input the TITLE/
CHAPTER, or hh:mm:ss to which you
want to jump. Use
1 or ¡ to select
TITLE/CHAPTER/TIME input. Use
ENTER to execute jumping.
- CD/VCD: Press ILL once to display:
GOTO --:--
- Use the 0-9 keys to input the mm:ss
from where you want to start
playback. Note that the input time
must be less than the total time of the
currently playing track.
- The GOTO function is unavailable for
MP3 playback.
• Reset
The reset button is located on the
housing, and must be pressed with
either a ballpoint pen or a thin metal
object. The reset button is to be
activated for the following reasons:
- After initial installation of the unit
when all wiring is completed.
- If the function buttons do not operate.
- If an error symbol is shown on the
display.
• Open
Press the OPEN button to open the
front panel.
• Remote Sensor (IR)
Point the remote control at the IR
sensor for receiving the remote control
signals.
• Turn Off the Player
Press the POWER button on the front
panel, or press POWER on the
remote control unit.
• On-screen Display
Function
Press the DISPLAY button during play
in order to display the contents of the
inserted disc on the screen.
Example:
- DVD
1. Press DISPLAY for the first time:
Title Number, Total Title Number,
Chapter Number and Total Chapter
Number of the Title on the disc
currently being played will be shown
on the display, along with the elapsed
time.
2. Press DISPLAY for the second time:
3. Press DISPLAY for the third time:
4. Press DISPLAY for the fourth time: