Panasonic FV-08VRL1 - Manual (Page 3)

DESCRIPTION
This product is UL listed E78414.
This product uses a sirocco fan driven by a capacitor motor.
The motor is designed to have an extended service life with reduced energy consumption.
It also incorporates a thermal-cut off for safety. The trim ring is a spring-loaded, quick remove type.
A damper for preventing air counterflow is provided. The blower uses a high-capacity sirocco fan
developed to reduce the noise level.
The lighting unit is an energy-saving, lighting device that uses one 18W fluorescent lamp and produces
almost the same illumination as a standard 75W incandescent lamp.
This product contains a self-ballasted fluorescent lamp and complies with Part 18 of the FCC rules
as consumer RF lighting device. Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
This product may cause interference to radio equipment and should not be installed near maritime safety
communications equipment or other critical navigation or communication equipment operating
between 0.45-30MFIz. If interference should occur, try to increase spacing between this product and
the other product.
Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
1-866-292-7292
Doc Responsible Party:
Sales Company:
Customer Call Support:
UNPACKING
Unpack and carefully remove the unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
SUPPLIED ACCESSORIES
Part name Appearance Quantity
Trim ring
o
1
Suspension
bracket I
2
Suspension
bracket n
2
18W
Fluorescent lamp
(Self-ballasted)
B B
1
Part name Appearance Quantity
Screw I
(ST4.2X6)
№
2
Screw II
(ST4.2X18)
2
Long screw
(ST4.2X20)
8
Installation
instructions
2
Warranty
sheet
1