Panasonic EW-BW10W - Manual (Page 21)

Recalling Stored Data
Readings can be recalled after being saved without having to first turn the
device on.
1
OFh
1 STA
'W
SYS. imH, DIA. imH:
N3 вг
Aig. Pulfe
/min.
V
'W
1
1 OFF>
1
ST^
SYS.
imH,
DIA. imir
N3
8?
M
30/90
Pulje
/min.
1
.
2 .
3.
Press the Memory/Recall button.
• The average of all recorded readings will be
displayed.
• The A/g. mark will be displayed.
• If, for example, 90 sets of readings have been
saved In the memory then the average of those
90 sets of readings will be displayed. If only one
set of readings has been saved then the
mark will not be displayed.
Press the Memory/Recall button again to
display the most recent reading.
• Each time you press the Memory/Recall button
another set of readings will be displayed, starting
with the next most recent readings.
Press the Off/On Start button to turn off the
device.
The device will turn off automatically after
30 seconds if you forget to turn it off.
Deleting all data stored in the memory
(1) Recall stored data.
(2) Press the Memory/Recall button again and hold it down for
more than three seconds to delete all data.
* It is not possible to delete individual readings.
(3) When all data has been deleted, the M mark and - - will be
displayed.
IJgliil 20