Go-Ped Super Go-Quad 30 - Manual (Page 3)

Section 6: Starting
6.1) Starting your non chain drive model
6.2) Starting your chain drive models
6.3) Starting your Bigfoot™, Go­Quad®,
Super Go­Quad™
6.4) “Easy Pull” pull starter
6.5) Engine Starting Instructions
6.6) Motorized Riding
Section 7: Free Wheel Scooting
7.1) Non­Chain Driven Models
7.2) Bigfoot™
7.3) Chain Drive Models
Section 8: Maintenance and Parts
8.1) Service and Maintenance Schedule
(new engine Brake­In)
8.2) Special Engine Maintenance
Section 9: Adjustment
9.1) Brakes
9.2) Wheels
9.3) Chain tension adjustments
9.4) Suspension Adjustment
9.4 Suspension:
For products with suspension there are a few adjustment procedures you need to be aware of:
•
Although your suspension is adjustable it
comes pre­adjusted and ready to ride from
the factory.
•
To make adjustments to your suspension,
screw the adjustment screws in CW (tighten)
for stiffer suspension feel, or out CCW
(loosen) for a more plush feel.
•
It may take a bit of riding for the suspension
to adapt completely to the adjustments made.
Adjustments should be made in small
increments and a light thread lock fluid may be
needed to secure screw setting.
•
The nut in the middle of the suspension
“knuckle” is for the disassembly of the
suspension. It takes special tools to assemble
the suspension properly so consult an authorized Go­Ped® Dealer before attempting any
replacement of internal suspension parts. However, tightening and or loosening this center nut
also stiffens and loosens the suspension so for models without the 4 adjustment screws you
can tighten CW this center nut for a stiffer feel or loosen CCW for a softer one. You just need to
make sure that the nut does not come off and liquid thread lock like Locktite is recommended if
you are loosening for a softer feel.
Contents
Section 1: Important Information
1.1) About this Manual
1.2) A SPECIAL NOTE FOR PARENTS
Section 2: Safety
2.1) Equipment Safety
2.2) Mechanical Safety Check
2.3) Scooting Safety
2.4) Rules to Scoot By
2.5) Stunts, Wheelies, or Jumps
2.6) Wet Weather Riding
2.7) Night Riding
Section 3: Assembly
3.1) Pre­assembled scooters
3.2) Some assembly required
3.3) Folding Feature
Section 4: Oil & Fuel Information
4.1) Oil and Fuel Mixing Instructions
4.2) Fueling & Pre­Operation
Section 5: Controls
Attention: To find more information, news, replacement parts, accessories, and support on
California Go­Ped® Brand Products, please visit us on­line at www.goped.com. You can also
become a “Go­Ped Brand Products” fan on FaceBook, follow us on Twitter “Go_Ped” and or
connect, have discussions or just see what other Go­Ped owners and fans are saying at
www.gopednatiion.com
Thank you for your recent acquisition of a California Go­Ped® brand product!
We are very happy and proud to welcome you to California Go­Ped®, the World’s Best
in Extreme Fun, Innovation and Quality. By choosing California Go­Ped®, you have
selected the highest quality scooter products in the World, which have been
handcrafted in the USA since 1985, using aircraft grade materials and the highest
quality components.
As the leader in innovation, design and performance California Go­Ped® has paved
the way for personal transportation by producing lightweight, fuel efficient, durable,
performance minded, and well­balanced machines.
As a new Go­Ped® owner and User, you now have access to the widest dealer
network, thousands of parts for your Go­Ped®, complete warranty coverage and instant
access to service.
You are now part of the fastest growing community of scooter enthusiasts in the world.
A technical hot line is available for further assistance 925­373­6309. You can also
find technical help videos and replacement parts by visiting the “FAQ” and
“Products” pages at www.goped.com