Flylink Full HD WIFI - Manual (Page 13)

13
2.4 Click the icon in the App list of the smartphone or tablet to open
it. Now you can preview the image sent by the DV on the phone or tablet
and start some operating. The operation interface on terminal is shown in
the following figure.
1. Video resolution
2. White balance
3. Setup (enter setup menu)
4. Enter Playback mode
5. Shutter button
6. Photo mode
7. Video mode
8. Wi-Fi signal icon
9. DV battery icon
3. iOS APP
3.1 Install iSmart DV APP (provided by dealer or via internet) on iOS
phone or tablet. When installation completes, the LCD will display
icon .
3.2 Insert the TF card and turn on the DV, then press the Wi-Fi button to
enable it. Now you can see the Wi-Fi icon on the LCD.
3.3 Enable Wi-Fi on iOS phone or tablet and search for wireless AP
signal rtwap_default, then connect it to DV, until the system displays
“Connected successfully”.