Eowave Eobody2 USB8 SensorBox - Manual (Page 19)

message Channel: [1-8]
This field enables the user to select a MIDI channel to which the MIDI message will apply (1 to 8).
value val: 0 - 127
This field enables the user to set the fixed parameter of a MIDI message associated with an
analogue input. This parameter value may correspond to a MIDI note number, a MIDI controller
number or a MIDI program number, depending on the type of MIDI message which is chosen.
Configuration map for analogue inputs
USB 8 sensor interface / Formating to host
Type of message Res. Value Hi Low
CC - Control Change 7 bits CC value
CC - Control Change 12 bits CC value
Note - Note on trigger 7 bits note number higher threshold lower threshold
PC - Program Change 7 bits PG value higher threshold lower threshold
PB - Pitch Bend 12 bits
PB - Pitch Bend 14 bits
ATm - monophonic aftertouch 7 bits