Canon D1 - Manual (Page 14)

Section Descriptions 1-7
[5] Conveyor Section
The booklets delivered from the booklet lifter section are laid out on the conveyor.
Delivery
Transport
Rollers
Output booklets are
held by this roller.
The position of the
roller is set automati-
cally to match the
booklet size.
Delivery Tray
*1
This tray holds the stacked
booklets. It is removable.
(When the tray is removed, the
conveyor full is not detected,
and the continuous operation is
possible.)
Transport Belts
This belt moves while booklets are being
output, after booklets are ejected, and
transports them.
Handle [TE]
Hold this handle and lift the roller unit when
removing the booklets on the conveyor.
*1
Removing the delivery tray.
1. Loosen two locking knobs.
2. Lift the delivery tray up to remove.
3. Tighten two locking knobs.
Booklet Detect
Sensor
This sensor detects
the conveyor full with
stacked booklets.
Delivery Tray
Locking Knobs