Cub Cadet 7252 - Manual (Page 14)

14
FENDER MOUNTED CONRTOLS AND FEATURES
Figure 12
A B
N
D E
F
G
H
K
J
H
J
K
L
G
C
M
A. Fuel Fill Cap
The fuel fill cap is located on the left fender beside
the operator’s seat.
WARNING: Never fill the fuel tank to
the top of the filler neck. Expansion
could result in overflow, allowing
highly flammable fuel to come in
contact with the operator.
B. PTO Reverse Override Switch
The PTO reverse override switch is located on the
left fender. Depress the front of the switch to
engage the override which allows the PTO to
operate while the tractor is traveling in the reverse
direction. Once activated, this function remains
activated until the ignition switch is turned to
the OFF position, regardless of the number of
times the PTO is turned off using the PTO switch.
WARNING: Use EXTREME caution
when operating PTO driven attach-
ments while traveling in the reverse
direction.
C. PTO Selection Lever
The PTO selection lever is located on the left
fender.
• Push the lever forward to engage the mid PTO.
• Push the lever rearward to engage the rear
PTO.
• Move the lever to the center position to
simultaneously engage both the rear PTO and
mid PTO.
D. Hydraulic Lift Lever w/Position Control
The hydraulic lift lever is located on the right fender.
This lever controls the position of the three point
hitch lift arms. There is a direct relationship
between the position of the lever and the height
position of the installed equipment.
• To lower the lift arms, move the lift lever
forward until the desired height setting is
attained.
• To raise the lift arms, move the lift lever
rearward until the desired height setting is
attained.
A
B
C
D
E
F G
H
J
K
L
M Fuel Fill Cap
PTO Reverse Override Switch
PTO Selection Lever
Hydraulic Lift Lever
Trans. Hi/Lo Shift Lever
Cup Holder Hand Holds
Amber Hazard Lights
Tail Lights (Red)
Reverse Lights (White)
Storage Tray
ROPS
Seat Belt
N