Front axle, Self-propelled mower – Cub Cadet CC 949 User Manual
Page 13
Self-Propelled Mower
9
7.
FRONT AXLE
7.1.
Disconnect and ground the spark plug wire.
7.2.
Take measures to prevent fuel from leaking from
the gas tank.
7.3.
Remove the front wheels.
7.4.
Remove the hairpin clip that holds the height
adjuster linkage from the left front wheel and dis-
connect the linkage. See Figure 7.4.
7.5.
Remove the four screws holding the front axle
on. See Figure 7.5.
7.6.
Slide the front axle assembly out.
7.7.
Reverse the covered process to install the front
axle.
7.8.
Run the mower before returning it to service.
Figure 7.4
Remove wheel
Remove
hair pin clip
Figure 7.5
four screws
See also other documents in the category Cub Cadet Special machinery:
- G1332 (20 pages)
- i1046 (36 pages)
- i1046 (32 pages)
- 54M (28 pages)
- 980 (20 pages)
- 949 (20 pages)
- Time Save (28 pages)
- 990 (24 pages)
- 997 (36 pages)
- V469 (20 pages)
- 6 Fabricated Deck (36 pages)
- M48-M60-KW (28 pages)
- 4 Fabricated Deck (36 pages)
- 4 Fabricated Deck (32 pages)
- 6 Fabricated Deck (28 pages)
- 4 Fabricated Deck (32 pages)
- 4 Fabricated Deck (32 pages)
- 6 Fabricated Deck (32 pages)
- 4 Fabricated Deck (32 pages)
- CC 500 BAT (30 pages)
- CC 22 (20 pages)
- 33" Wide Area (29 pages)
- Z-Wing (88 pages)
- TANK S Series: Electrical System (9 pages)
- TANK S Series: Hydraulic Drive & Steering System (12 pages)
- TANK S Series: Steering System Adjustments (11 pages)
- 640 (24 pages)
- 640 (20 pages)
- 641 (24 pages)
- 641 (20 pages)
- J466 (32 pages)
- Series C460 (28 pages)
- 435A (24 pages)
- 642 (24 pages)
- 414 (24 pages)
- M465 (28 pages)
- Fun Runner (117 pages)
- 4 x 2 Big Country - Steel Bed (38 pages)
- 4 x 2 Big Country - Poly Bed & Steel Bed (82 pages)
- 4 x 4 Volunteer (328 pages)
- 6 x 4 Big Country (121 pages)
- CC 4BP 32cc (29 pages)
- 2518-48 (60 pages)
- 1525 (39 pages)