COP-USA SLDVR - Manual (Page 14)

13
3. Motion Detection Area Setup:
(1) Press (MENU/OK) button to edit detection block.
Mode
CELL EDIT Single detection cell setup (detection/ non-detection)
DEL BLOCK Disable a block
DEL ALL Delete all cells
ADD BLOCK Enable a block
ADD ALL Enable all cells
(2) Press (MENU/OK) button to switch cursor to edit mode (cursor color is pink). Press
directional button, follow step (1) to change the size of the detection block.
(3) Detection area is shown by color red, press Enter to enable/ disable the
detection block.
4. Motion Detection Sensitivity Setup:
Changing the alert value may affect the recording sensitivity of the Motion Detection.
MD ENERGY Reveals current sensitivity rate ( NOTE 1 ).
MD THRESHOLD Reveals user sensitivity rate setup. Press directional
buttons, to change the motion detection threshold level
(
NOTE 2 ).
NOTE 1: Motion detection is triggered when MD ENERGY level exceeds MD THRESHOLD level
(red block).
NOTE 2: The red cells reveals the setup made by the user.