COP-USA CD250XIR-WDR - Manual (Page 3)

2. DAY & NIGHT
MODE SMART LED / NIGHT / DAY / AUTO
BURST ON/OFF
DAY / NIGHT 0~255
NIGHT / DAY 0~255
DELAY TIME 0~10
CDS_START 0~255
CDS_END 0~255
EXIT
MODE:
SMART LED
Adjusts the IR level and also adjust the brightness
depending on the distance of the object
NIGHT
Stays on Night mode and B/W
DAY
BURST:
ON
When this is selected, a COLOR ‐ B/W picture will be
shown .This will increase the noise .
OFF
When this is Selected a true B/W piocture will be CDS:
CDS_START
This Option sets the CDS Sensor level which will determine when
DELAY TIME:
This Function controls the switching time between DAY mode to
NIGHT mode, and From NIGHT mode to DAY mode.
3. EFFECT
FREEZE
MIRROR
HORI / VERT / ROTATE
D.ZOOM ON/OFF (X1.0~X10.0)
SHARPNESS SHARPNESS (0~49)
STABILIZER
EXIT
Stays on DAY mode and Color
AUTO
Camera switches from Color to B/W depending on
the illumination of the scene.
DAY/NIGHT
This Option sets the brightness level which will
determine when to switch from DAY to NIGHT mode.
NIGHT/DAY
This Option sets the brightness level which will
determine when to switch from NIGHT to DAY mode.
p
to switch from DAY to NIGHT mode. And to turn the IR Cut ON
CDS_END
This Option sets the CDS level which will determine when to
switch from NIGHT to DAY mode.And to turn the IR Cut OFF.
MIRROR
This Option allows you to mirror the image horizontally , vertically and Rotate (turns the image Upside
down.
D.ZOOM
This Function allows to magnify a image up to 10X digital.
SHARPNESS
Adjust the Image Sharpness decreasing or Increasing the Values
STABILIZER
This function helps to stabilize the picture and reduce the
image shake when the camera physically moves. This
function is useful especially when using a high‐zoom lens,
where every small movement of the camera results in shake