COP-USA CHLP100IR-EF - Manual (Page 2)

1. GENERAL
ZOOM ON/OFF
NEGA/POSI POSI/NEGA
SHARPNESS 0‐15
MIRROR NORMAL ‐ HORIZONTAL ‐ VERTICAL ‐ ROTATE
ECLIPSE ON/OFF
SYNC INT
INITIAL ON/OFF
ZOOM:(Digital Zoom)
ON/OFF
NEGA/POSI:(Negative or Positive
Image)
SHARPNESS:
Adjusts the Shapness of the Image
the bigger the number the sharper
MIRROR:
NORMAL‐ normal position
HORIZONTAL ‐ flip the image
horizontally
VERTICAL‐ flip the image vertically
ROTATE ‐ rorates the image 90
degrees clockwise
ECLIPSE:(Blocks an Intense light)
SYNC:
The Line‐Lock (L/L) feature allows
the camera to synchronize its
frame rate to the power line phase.
The function is only available
when the camera is operated by AC
power. It allows the reduction
of the fluorescent lights color
rolling effect. When using 12v DC
h i i ll
2. AWB
WB MODE ATW/ AWC / MANUAL / PUSH
RED CONT. NOT USE / NOT USE / 70
BLUE CONT NOT USE / NOT USE / 50
PUSH AUTO NOT USE / OFF / NOT USE
COLOR GAIN SET / SET / SET
INITIAL ON/OFF ‐ ON/OFF ‐ ON/OFF
the image gets.
ATW ( Auto Tracking White Balance)
It Automatically adjusts the color between
1.800K and 10500K.
Use this option if the lighting conditions
changes constantly
AWC ( Preset White Balance)
Use this option when many white objects
appears on the scene and also when a object
merges to the scene with similar color shade
power, the camera is automatically
set to internal (INT) synchronization
MANUAL(Adjust the color manually)
Adjust the RED and BLUE settings with values
ranging from 0~255
PUSH
Adjust the white balance by focusing at a
white object or white sheet of paper and pres
s enter to adjust the color. RED CONT.
Adjust the RED gain settings with values
ranging from 0~255
BLUE CONT.
Adjust the BLUE gain settings with values
ranging from 0~255
PUSH AUTO.
It is used in environment full of non
“white” light (like bright yellow light)
which affect the AWB and cause a falls
color under AWB.In this case you can
take a white paper in natural light
environment and choose PUSH. The
WB values will be set from now and
will not change automatically any
more.
COLOR GAIN.
R for red (0~20); B for blue (0~20). The
system default valve is 15 .