Cannon DIGI-TROLL 5 TS - Manual (Page 22)

22
www.cannondownriggers.com
Un/Coated Menu
This menu lets you switch between Cannon coated and uncoated cable. This setting is important as well in deter-
mining accurate line out.
Press the Menu (4) four times from the depth screen or once form the Units screen.
Getting Started
Digi-Troll Factory Settings
Your Digi-Troll 5 was shipped with the following factory settings so that you can use your downrigger immediately
without further programming.
Line
on Reel 400 feet
PIC 0.6 vdc
Cable setting Uncoated
Units English