Brookfield CT3 Texture Analyzer - Manual (Page 46)

Brookfield Engineering Labs., Inc. Page 46 Manual No. M08-372-C0113
TA-GPJ GENERAL PEELING JIG
This fixture measures the adhesive strength needed to remove the lid froma sealed
container at 0
˚, 45˚, and 90˚ angles. Requires Fixture Base Table TA-BT-KIT.
TA-HCF HAIR COMBABILITY TEST FIXTURE
This fixture measures the effect of products, such as shampoo and conditioners,
on the combability of hair.
TA-JMPA JUNIOR MULTIPLE PROBE ASSEMBLY
This multiple probe assembly, consisting of nine 3mm probes and corresponding
base plate, is specifically designed to hold nine small samples of irregular
geometry, such as peas, corn, nuts or dried fruit. Requires Fixture Base Table
TA-BT-KIT.
TA-KF KEIFFER DOUGH AND GLUTEN EXTENSIBILITY FIXTURE
This fixture quantifies maximum force and distance needed to break the sample.
Requires Fixture Base Table TA-BT-KIT.
TA-KSC KRAMER SHEAR CELL
The Kramer Shear Cell follows principles of the Allo-Kramer Shear Press. Test
cell (53mm X 57mm X 56mm) has clear Perspex front for viewing test progress.
Ten shear cutting blades alternating (65mmL) are loosely suspended from blade
holder. Blade holder has quick-release mounting mechanism allowing removal
fro cleaning withour distrubing the alighnment. Requires Fixture Base Table
TA-BT-KIT.
TA-LC LIPSTICK CANTILEVER TEST FIXTURE
This fixture allows imitative tests on lipstick and similar products to quantify the
strength of a product. Requires Fixture Base Table TA-BT-KIT.
TA-LTT LOOP TACK TESTER
This tester measures the adhesive strength of pressure sensitive tape and stickers
according to ASTM D6195. Requires Fixture Base Table TA-BT-KIT.
TA-MA MUCO ADHESION TEST FIXTURE
This fixture quantifies tablet adhesiveness to a mucosal surface by simulating
body and temp conditions and force needed to pull tablet away from surface.
TA-MDI METER DOSE INHALER TEST FIXTURE
This fixture measuresthe push-button force to actuate the inhaler. Requires
Fixture Base Table TA-BT-KIT.
TA-MCF MULTIPLE CHIP FIXTURE
This fixture is used for testing the penetration or firmness of multiple chips/
french fries. Requires Fixture Base Table TA-BT-KIT.
TA-MP MESH PROBE
This fixture quantifies the consistency of products such as mayonnaise and
yogurt. Requires Fixture Base Table TA-BT-KIT.