Aviom SB4 - Manual (Page 8)

Welcome
Thank you for purchasing the Aviom SB4 System Bridge for use with Pro16® monitor
mixing, digital snake, and audio networking products. This User Guide is designed to make
the installation and setup of your new product quick and easy.
Overview
The SB4 System Bridge is designed to be used with Aviom’s Pro16 Series products to simplify Cat-5 cabling
in personal mixing, digital snake, or audio distribution systems. All network connections on the SB4 feature
heavy-duty locking Neutrik® EtherCon® connectors.
An SB4 is used to combine up to four 16-channel A-Net® streams from analog input modules or digital
console cards and transport that data over a single Cat-5 cable. The unit’s A-Net Bridge output carries up
to 64 channels between the SB4 System Bridge and either another SB4 System Bridge or a D800 A-Net
Distributor.
Front panel view
Rear panel view
SB4 Features:
Four A-Net I/O ports on the rear panel (16 channels each) •
Neutrik EtherCon connectors •
One front-panel A-Net Bridge output (up to 64 channels), with EtherCon connector •
Simplifies the connection of multiple digital console cards to A360 Personal Mixers •
Multiple SB4 units can be used to create digital snake systems •
Requires no power supply •
1 SB4 S yStem
B
ridge
U
Ser
g
Uide